Home / All / Expansion Valves / BMW/ Mini Expansion Valve /

Expansion Valve BMW E38/E39

Categories

Expansion Valve BMW E38/E39

Expansion Valve BMW E38/E39
CategoriesBMW/ Mini Expansion Valve
BrandINTL Auto Air Conditioning Compressor
ModelINTL-EH061
Sizepacking : 25*20*15
TypeExpansive valve
Car Makefor BMW E38/E39
OE NO.INTL-EH061
Quality1 grade
Guarantee1 year
Car Modelfor BMW E38/E39
FOB porthuangpu
Terms of PaymentL/C, T/T, Western Union, MoneyGram, paypal
Update TimeDec 25,2024
Detail Information


PRODUCT PROFILE                                                                   

 

 





Specification:

Model No.: INTL-EH061

Car Model: BMW E38/E39




USED for:

Expansion Valve for BMW E38/E39 CAR





THERMAL EXPANSION VALVE (TXV) OVERVIEW

The TXV meters the amount of liquid refrigerant that can flow into the evaporator. Located at the evaporator inlet, the TXV is the dividing point between the high and the low pressure sides of the A/C system. As the refrigerant passes through the TXV, the refrigerant pressure is lowered. Due to the pressure differential, the liquid refrigerant will begin to boil at the TXV outlet before entering the evaporator core. This characteristic is observed as a drop in temperature between the TXV inlet tube and the evaporator inlet tube.

Before replacing TXVs, always follow the A/C Performance Diagnostic in the Service Information to verify the valve performance and review the following diagnostic tips.

TXV FAILURE MODES  

A/C Not Operative or Intermittent Possible Causes:

1, Bulb Sensor -

Temperatures on inlet and outlet tubes:

Are the temperatures on both sides (inlet and outlet tubes) of the evaporator thermal expansion valve tube at the expansion device similar? If yes, replace the damaged or faulty thermal expansion valve.

Pressures:

Are both the low side and high side pressures within the specified values? Refer to the appropriate HVAC zone diagnostic.

2, Incorrect refrigerant charge -

Diagnose and repair potential leak and/or fill A/C system with correct charge.

3, Leaking interfaces (Incorrect fastening at TXV or seal damage) -

Apply correct torque or replace seals if necessary.

4, System contamination -

Is the liquid line extremely cold at the expansion device location and warm beyond the expansion device location? The expansion device is restricted. Inspect for contamination (brown, powdery residue or metal flake) and replace TXV.

Noise Possible Causes:

1, Leaking interfaces (Incorrect fastening at TXV) -

Fill system with correct charge.

2, Incorrect refrigerant charge -

Fill system with correct charge.

3, Non-optimized TXV/evaporator/plumbing -

Verify if noise is being produced by the TXV or other A/C system components.

TIP: Do not replace the TXV until you verify all previous steps and you can eliminate all other failure modes.

PACKAGE & DELIVERY                                                             

 

88310-52480 88310-52481 447190-5940 A/C COMPRESSOR for toyota YARIS

OUR SALES TEAM & OFFICE                                                   

 Efficient sales team waiting for your inquiries ! 

 

 88310-52480 88310-52481 447190-5940 A/C COMPRESSOR for toyota YARIS

EXHIBITIONS                                                                             

 Thank you for all buyers ' support !

 

88310-52480 88310-52481 447190-5940 A/C COMPRESSOR for toyota YARIS

PRODUCT CATEGORIES                                                              88310-52480 88310-52481 447190-5940 A/C COMPRESSOR for toyota YARIS        88310-52480 88310-52481 447190-5940 A/C COMPRESSOR for toyota YARIS  

 

 88310-52480 88310-52481 447190-5940 A/C COMPRESSOR for toyota YARIS     88310-52480 88310-52481 447190-5940 A/C COMPRESSOR for toyota YARIS

88310-52480 88310-52481 447190-5940 A/C COMPRESSOR for toyota YARIS


Please send your message to us
*Email
Name
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address