Home / All / Auto Compressors / sanden 7 series compressor /

AUTO air conditioning ac compressor PV8 pulley compressor SANDEN SD709 SD-709 7H15 SD7H15 universal used ac kompresor

Categories

AUTO air conditioning ac compressor PV8 pulley compressor SANDEN SD709 SD-709 7H15 SD7H15 universal used ac kompresor

AUTO air conditioning ac compressor PV8 pulley compressor SANDEN SD709 SD-709 7H15 SD7H15 universal used ac kompresor
AUTO air conditioning ac compressor PV8 pulley compressor SANDEN SD709 SD-709 7H15 SD7H15 universal used ac kompresorAUTO air conditioning ac compressor PV8 pulley compressor SANDEN SD709 SD-709 7H15 SD7H15 universal used ac kompresorAUTO air conditioning ac compressor PV8 pulley compressor SANDEN SD709 SD-709 7H15 SD7H15 universal used ac kompresorAUTO air conditioning ac compressor PV8 pulley compressor SANDEN SD709 SD-709 7H15 SD7H15 universal used ac kompresor
Categoriessanden 7 series compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-C130
SizePACKING : 25*22*19
TypeCompressor
Car Make7h15 universal
OE NO.SANDEN SD709 7H15 SD-709 SD7H15
QUALITYGRADE ONE
OEM#SANDEN SD709 7H15 SD-709 SD7H15
FOB porthuangpu
Terms of PaymentL/C, T/T, Western Union, MoneyGram, paypal
Download
Update TimeDec 22,2024
Detail Information


Specification:

Model number: INTL-C130

Car name: Universal

Compressor Type: 7H15

Clutch:8PK

Volt:12V


OEM#

SANDEN

SD709

7H15

SD-709

SD7H15


1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced



Please send your message to us
*Email
Name
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Address